{"id":6668,"date":"2026-06-23T15:38:39","date_gmt":"2026-06-23T15:38:39","guid":{"rendered":"https:\/\/pickandplacemachine.com\/?p=6668"},"modified":"2026-06-23T15:44:17","modified_gmt":"2026-06-23T15:44:17","slug":"odd-shaped-elements-non-standard-part-handling","status":"publish","type":"post","link":"https:\/\/pickandplacemachine.com\/tr\/odd-shaped-elements-non-standard-part-handling\/","title":{"rendered":"Odd-Shaped Elements: Non-Standard Part Handling"},"content":{"rendered":"<p class=\"wp-block-paragraph\">Shapes break presumptions.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A production line may position thousands of standard parts per hour yet quit repetitively since one adapter is tall, off-centre, vulnerable, or inconsistently presented.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">That is the actual issue behind&nbsp;<strong>Non-Standard Part Handling<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In electronics producing, an odd-shaped element is not just uncommon in look. It belongs that falls outside the dependable operating variety of standard tape-fed, vacuum-picked SMT devices.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Examples consist of:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Big adapters and sockets<\/li>\n\n\n\n<li>Transformers, coils, and passes on<\/li>\n\n\n\n<li>Tall electrolytic capacitors<\/li>\n\n\n\n<li>Heat sinks and shields<\/li>\n\n\n\n<li>Through-hole buttons and terminals<\/li>\n\n\n\n<li>Versatile circuits and wires<\/li>\n\n\n\n<li>Gaskets, lenses, and rubber parts<\/li>\n\n\n\n<li>Components provided loosened or in irregular trays<\/li>\n\n\n\n<li>Parts with bent, permeable, oily, or reflective surfaces<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">JUKI explains odd-form insertion as the handling of big or uneven components that can not be refined through traditional surface mounting and might arrive loosened rather than on reels.&nbsp;<a href=\"https:\/\/www.juki.co.jp\/en\/products\/smt.html\" target=\"_blank\" rel=\"noopener\">JUKI SMT Systems<\/a><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The procedure is broader than positioning:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Existing \u2192 different \u2192 orient \u2192 recognize \u2192 grasp \u2192 validate \u2192 move \u2192 place \u2192 inspect \u2192 recoup<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Every action must be steady.<\/p>\n\n\n\n<h2 id=\"why-criterion-pick-and-place-methods-fail\" class=\"wp-block-heading\">Why Criterion Pick-and-Place Methods Fail<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Traditional SMT placement depends upon regulated product packaging, recognized pickup points, constant dimensions, and predictable positioning.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Odd-shaped element dealing with gets rid of those presumptions.<\/p>\n\n\n\n<h3 id=\"poor-pick-up-surfaces\" class=\"wp-block-heading\">Poor pick-up surfaces<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Vacuum holding force is roughly:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Pressure distinction \u00d7 secured pickup location<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Yet real performance likewise depends upon leakage, velocity, vibration, surface area structure, element mass, and centre of gravity.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A flat IC is simple. A ribbed connector is not.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><a href=\"https:\/\/pickandplacemachine.com\/wp-admin\/post.php?post=1679&amp;action=edit\"><img decoding=\"async\" width=\"960\" height=\"640\" src=\"https:\/\/pickandplacemachine.com\/wp-content\/uploads\/2026\/06\/SMT-Consumables3.jpg\" alt=\"SMT Sarf Malzemeleri\" class=\"wp-image-6679\" srcset=\"https:\/\/pickandplacemachine.com\/wp-content\/uploads\/2026\/06\/SMT-Consumables3.jpg 960w, https:\/\/pickandplacemachine.com\/wp-content\/uploads\/2026\/06\/SMT-Consumables3-300x200.jpg 300w, https:\/\/pickandplacemachine.com\/wp-content\/uploads\/2026\/06\/SMT-Consumables3-768x512.jpg 768w, https:\/\/pickandplacemachine.com\/wp-content\/uploads\/2026\/06\/SMT-Consumables3-18x12.jpg 18w\" sizes=\"(max-width: 960px) 100vw, 960px\" \/><\/a><\/figure>\n\n\n\n<h3 id=\"offset-weight\" class=\"wp-block-heading\">Offset weight<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">An element may appear safe while stationary but rotate or separate during rapid activity. Tall parts are specifically difficult due to the fact that their centre of mass sits far from the gripping point.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Possible remedies include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Wider custom-made nozzles<\/li>\n\n\n\n<li>Numerous vacuum factors<\/li>\n\n\n\n<li>Mechanical grippers<\/li>\n\n\n\n<li>Decreased acceleration<\/li>\n\n\n\n<li>Improved pick-up placing<\/li>\n<\/ul>\n\n\n\n<h3 id=\"challenging-vision-problems\" class=\"wp-block-heading\">Challenging vision problems<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Black plastic, reflective steel, clear housings, and inconsistent lead forms can perplex typical vision algorithms.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Better outcomes might call for adjusted lights angles, polarisation, exposure, history comparison, side discovery, or 3D height information.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Yamaha distinguishes high-speed placement heads from flexible heads made for tall and odd-shaped components. Its FM head sustains parts up to 55 \u00d7 100 millimetres and 30 millimetres high.&nbsp;<a href=\"https:\/\/global.yamaha-motor.com\/business\/smt\/glossary\/0004.html\" target=\"_blank\" rel=\"noopener\">Yamaha SMT Reference<\/a><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Facility component handling is as a result a different engineering task, not a simple device setup.<\/p>\n\n\n\n<h2 id=\"the-feeder-is-typically-the-genuine-issue\" class=\"wp-block-heading\">The Feeder Is Typically the Genuine Issue<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Lots of manufacturing facilities spend heavily on robots while neglecting component presentation.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A rapid robot can not dependably process parts that get here twisted, upside-down, polluted, or dimensionally inconsistent.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Usual presentation approaches consist of:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Matrix or thermoformed trays<\/li>\n\n\n\n<li>Tape-and-reel conversion<\/li>\n\n\n\n<li>Tube feeders<\/li>\n\n\n\n<li>Vibratory bowls<\/li>\n\n\n\n<li>Step feeders<\/li>\n\n\n\n<li>Vision-guided versatile feeders<\/li>\n\n\n\n<li>Pallets and nests<\/li>\n\n\n\n<li>Operator-loaded components<\/li>\n\n\n\n<li>Mass container choosing<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">A dedicated dish feeder might be fast for one stable part but costly to change after an item alteration. Adaptable feeders set you back even more initially but can support numerous part households with software application and tooling adjustments.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For altering product blends,&nbsp;<a href=\"https:\/\/pickandplacemachine.com\/solution\/mixed-smt-lines\/\">combined SMT line arrangements<\/a>&nbsp;may be better than optimum placement speed. For NPI and lower volumes,&nbsp;<a href=\"https:\/\/pickandplacemachine.com\/solution\/prototype-small-batch-lines\/\">model and small-batch lines<\/a>&nbsp;maintain adaptability.<\/p>\n\n\n\n<h2 id=\"picking-the-right-gripping-method\" class=\"wp-block-heading\">Picking the Right Gripping Method<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">There is no global ideal devices for odd-shaped components. The appropriate remedy relies on geometry, product, cycle time, production volume, and anticipated item changes.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Handling technique<\/th><th>Best application<\/th><th>Key risk<\/th><\/tr><\/thead><tbody><tr><td>Basic vacuum cleaner nozzle<\/td><td>Apartment, rigid surfaces<\/td><td>Leakage or rotation<\/td><\/tr><tr><td>Custom vacuum nozzle<\/td><td>Huge or offset parts<\/td><td>Part-specific tooling expense<\/td><\/tr><tr><td>Identical gripper<\/td><td>Parts with strong sidewalls<\/td><td>Crushing or marking<\/td><\/tr><tr><td>Three-jaw gripper<\/td><td>Round or asymmetric components<\/td><td>Collision with close-by features<\/td><\/tr><tr><td>Soft gripper<\/td><td>Fragile or variable shapes<\/td><td>Lowered positional precision<\/td><\/tr><tr><td>Magnetic gripper<\/td><td>Ferrous parts<\/td><td>Material restrictions<\/td><\/tr><tr><td>Tool-changing robotic<\/td><td>High-mix manufacturing<\/td><td>Cost and upkeep<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Tooling should hold the part without concealing the attributes required for assessment or colliding with nearby board elements.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Consequently,&nbsp;<a href=\"https:\/\/pickandplacemachine.com\/smt-nozzle\/\">SMT nozzles and accessories<\/a>&nbsp;need to be taken care of as controlled production tooling, with records for modification, compatibility, cleaning, pickup placement, and life span.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><a href=\"https:\/\/pickandplacemachine.com\/wp-admin\/post.php?post=1578&amp;action=edit\"><img decoding=\"async\" width=\"960\" height=\"640\" src=\"https:\/\/pickandplacemachine.com\/wp-content\/uploads\/2026\/06\/SMT-Consumables1.jpg\" alt=\"SMT Sarf Malzemeleri\" class=\"wp-image-6677\" srcset=\"https:\/\/pickandplacemachine.com\/wp-content\/uploads\/2026\/06\/SMT-Consumables1.jpg 960w, https:\/\/pickandplacemachine.com\/wp-content\/uploads\/2026\/06\/SMT-Consumables1-300x200.jpg 300w, https:\/\/pickandplacemachine.com\/wp-content\/uploads\/2026\/06\/SMT-Consumables1-768x512.jpg 768w, https:\/\/pickandplacemachine.com\/wp-content\/uploads\/2026\/06\/SMT-Consumables1-18x12.jpg 18w\" sizes=\"(max-width: 960px) 100vw, 960px\" \/><\/a><\/figure>\n\n\n\n<h2 id=\"vision-pressure-and-verification\" class=\"wp-block-heading\">Vision, Pressure, and Verification<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Reputable automation verifies the procedure as opposed to presuming that a completed robot activity implies effective setting up.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Helpful checks consist of:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li>Confirm that the correct component is present.<\/li>\n\n\n\n<li>Verify successful pick-up with vacuum cleaner or grasp sensing.<\/li>\n\n\n\n<li>Evaluate the element after pickup for rotation or deformation.<\/li>\n\n\n\n<li>Display insertion or positioning pressure.<\/li>\n\n\n\n<li>Confirm seats, positioning, or attachment.<\/li>\n\n\n\n<li>Record the dish, feeder, tool, image, and pressure result.<\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">Pressure tracking is especially important for connectors, terminals, switches, and through-hole parts.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Inadequate pressure might leave the element unseated. Way too much force might flex pins, damage the housing, or split the PCB.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A robot reaching its configured placement does not verify that every port pin went into the appropriate opening.<\/p>\n\n\n\n<h2 id=\"a-genuine-odd-form-automation-example\" class=\"wp-block-heading\">A Genuine Odd-Form Automation Example<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">In December 2024, JUKI presented the JM-E01, which incorporates irregular-component insertion and automated screw fastening.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">JUKI mentions that the device can process parts consisting of coils and aluminium electrolytic capacitors approximately 90 millimetres high and 80 millimetres in body size.&nbsp;<a href=\"https:\/\/www.juki.co.jp\/smt\/en\/news\/8172\/\" target=\"_blank\" rel=\"noopener\">JUKI JM-E01 Statement<\/a><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Integrating insertion and attachment requires control of tooling, force, torque, board assistance, accident dangers, and manufacturing sequencing.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This is why&nbsp;<a href=\"https:\/\/pickandplacemachine.com\/solution\/turnkey-smt-line-solutions\/\">turnkey SMT line integration<\/a>&nbsp;issues. The odd-form machine must operate with conveyors, upstream positioning, assessment, buffering, software, and upkeep systems.<\/p>\n\n\n\n<h2 id=\"just-how-to-handle-non-standard-parts\" class=\"wp-block-heading\">Just How to Handle Non-Standard Parts<\/h2>\n\n\n\n<h3 id=\"1-qualify-the-part\" class=\"wp-block-heading\">1. Qualify the part<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Document:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Minimum and maximum measurements<\/li>\n\n\n\n<li>Weight and center of gravity<\/li>\n\n\n\n<li>Surface material<\/li>\n\n\n\n<li>Authorized gripping locations<\/li>\n\n\n\n<li>Fragile or limited areas<\/li>\n\n\n\n<li>Lead and pin geometry<\/li>\n\n\n\n<li>Maximum grasping and insertion pressure<\/li>\n\n\n\n<li>Product packaging variation<\/li>\n\n\n\n<li>Distributor tolerances<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Do not count only on drawings. Measure physical samples from several manufacturing lots.<\/p>\n\n\n\n<h3 id=\"2-separate-feeding-from-positioning\" class=\"wp-block-heading\">2. Separate feeding from positioning<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Initial examination whether the part can be picked accurately from a controlled nest.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If it can, the feeder is most likely the major issue.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If it can not, boost the gripper, nozzle, vision, movement profile, or insertion procedure prior to automating feeding.<\/p>\n\n\n\n<h3 id=\"3-determine-the-total-cycle\" class=\"wp-block-heading\">3. Determine the total cycle<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Use:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Feeding + positioning + acknowledgment + pickup + verification + movement + placement + inspection + recovery<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Robotic movement time alone is deceptive.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A stable ten-second procedure might outmatch an eight-second procedure that stops working routinely.<\/p>\n\n\n\n<h3 id=\"4-examination-practical-variant\" class=\"wp-block-heading\">4. Examination practical variant<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Credentials must consist of:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Multiple component great deals<\/li>\n\n\n\n<li>Dimensional extremes<\/li>\n\n\n\n<li>Partly vacant feeders<\/li>\n\n\n\n<li>Maker reboots<\/li>\n\n\n\n<li>Used tooling<\/li>\n\n\n\n<li>Appropriate surface area contamination<\/li>\n\n\n\n<li>Reversed or nested parts<\/li>\n\n\n\n<li>Board warpage<\/li>\n\n\n\n<li>Operator changeovers<\/li>\n\n\n\n<li>Failed-pick recuperation<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">A brief demo shows opportunity. It does not show manufacturing dependability.<\/p>\n\n\n\n<h3 id=\"5-measure-the-appropriate-data\" class=\"wp-block-heading\">5. Measure the appropriate data<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Track:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Feeding success<\/li>\n\n\n\n<li>First-attempt pickup rate<\/li>\n\n\n\n<li>Alignment precision<\/li>\n\n\n\n<li>Positioning or insertion ability<\/li>\n\n\n\n<li>False declines<\/li>\n\n\n\n<li>Operator interventions<\/li>\n\n\n\n<li>Tool life<\/li>\n\n\n\n<li>De\u011fi\u015fim s\u00fcresi<\/li>\n\n\n\n<li>Healing time<\/li>\n\n\n\n<li>Scrap and revamp<\/li>\n\n\n\n<li>Output per staffed hour<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">A 0.5% failing rate develops 50 problems for every single 10,000 parts processed.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><a href=\"https:\/\/pickandplacemachine.com\/wp-admin\/post.php?post=1513&amp;action=edit\"><img decoding=\"async\" width=\"960\" height=\"640\" src=\"https:\/\/pickandplacemachine.com\/wp-content\/uploads\/2026\/06\/SMT-Consumables2.jpg\" alt=\"SMT Sarf Malzemeleri\" class=\"wp-image-6678\" srcset=\"https:\/\/pickandplacemachine.com\/wp-content\/uploads\/2026\/06\/SMT-Consumables2.jpg 960w, https:\/\/pickandplacemachine.com\/wp-content\/uploads\/2026\/06\/SMT-Consumables2-300x200.jpg 300w, https:\/\/pickandplacemachine.com\/wp-content\/uploads\/2026\/06\/SMT-Consumables2-768x512.jpg 768w, https:\/\/pickandplacemachine.com\/wp-content\/uploads\/2026\/06\/SMT-Consumables2-18x12.jpg 18w\" sizes=\"(max-width: 960px) 100vw, 960px\" \/><\/a><\/figure>\n\n\n\n<h2 id=\"manual-handling-versus-automation\" class=\"wp-block-heading\">Manual Handling Versus Automation<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Hand-operated insertion may continue to be economical for low-volume or regularly transforming products.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Nevertheless, manual labor can present variant in alignment, seating force, lead damage, result, contamination, and traceability. Repeated activity and unpleasant pose can also produce ergonomic risks, as described in&nbsp;<a href=\"https:\/\/www.osha.gov\/ergonomics\" target=\"_blank\" rel=\"noopener\">OSHA comfort designs assistance<\/a>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Still, a properly designed hands-on component is usually better than an unpredictable robot cell that needs engineering support throughout every changeover.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Automation needs to eliminate reliance, not move it from drivers to programmers.<\/p>\n\n\n\n<h2 id=\"when-high-speed-automation-makes-sense\" class=\"wp-block-heading\">When High-Speed Automation Makes Sense<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">High-speed odd-form automation is most suitable when:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Element layout is stable<\/li>\n\n\n\n<li>Manufacturing volume is high<\/li>\n\n\n\n<li>Product life is long<\/li>\n\n\n\n<li>Work or flaw prices are substantial<\/li>\n\n\n\n<li>Cycle time frame capacity<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Manufacturing facilities planning&nbsp;<a href=\"https:\/\/pickandplacemachine.com\/solution\/high-speed-mass-production-lines\/\">y\u00fcksek h\u0131zl\u0131 seri \u00fcretim SMT hatlar\u0131<\/a>&nbsp;must verify that odd-shaped elements can satisfy takt time, not just typical SMD parts.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">ROI calculations ought to include labour, rework, shed capability, tooling, feeders, integration, recognition, maintenance, software, spares, and future item modifications.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Overlooking transition and maintenance develops an unrealistic organization instance.<\/p>\n\n\n\n<h2 id=\"assessment-requirements\" class=\"wp-block-heading\">Assessment Requirements<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Odd-shaped elements might develop darkness, reflections, or concealed connections that common AOI can not evaluate reliably.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Possible methods include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>2D vision<\/li>\n\n\n\n<li>Angled electronic cameras<\/li>\n\n\n\n<li>3D AOI<\/li>\n\n\n\n<li>Laser height dimension<\/li>\n\n\n\n<li>Electric screening<\/li>\n\n\n\n<li>Force-displacement analysis<\/li>\n\n\n\n<li>Torque verification<\/li>\n\n\n\n<li>X-ray examination<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">The correct&nbsp;<a href=\"https:\/\/pickandplacemachine.com\/smt-inspection-system\/\">SMT assessment system<\/a>&nbsp;is the one that spots the genuine issue. A thorough picture is worthless if it can not recognize a hidden bent pin.<\/p>\n\n\n\n<h2 id=\"frequently-asked-inquiries\" class=\"wp-block-heading\">Frequently Asked Inquiries<\/h2>\n\n\n\n<h3 id=\"what-is-non-standard-component-handling\" class=\"wp-block-heading\">What is Non-Standard Component Handling?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Non-standard part handling is the controlled feeding, identification, grasping, orientation, positioning, insertion, and inspection of parts whose form, product packaging, weight, surface, lead framework, or fragility prevents reputable handling with conventional high-speed positioning devices.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It consists of feeders, tooling, cams, pressure sensors, software program, inspection, and fault recovery.<\/p>\n\n\n\n<h3 id=\"exactly-how-do-you-deal-with-non-standard-components-accurately\" class=\"wp-block-heading\">Exactly how do you deal with non-standard components accurately?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Dependable non-standard part handling begins by measuring the component, securing its presentation, selecting an ideal gripping technique, validating alignment, managing insertion force, and producing a recovery process before production begins.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Feeding and placement should be examined individually before being combined.<\/p>\n\n\n\n<h3 id=\"what-is-the-most-effective-equipment-for-odd-shaped-components\" class=\"wp-block-heading\">What is the most effective equipment for odd-shaped components?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The best devices for odd-shaped parts is the most basic validated mix of feeder, gripper, vision system, motion platform, pressure control, and assessment that satisfies takt time, high quality, changeover, and production-volume requirements.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The solution may be an adaptable mounter, robot, odd-form inserter, or hand-operated component.<\/p>\n\n\n\n<h3 id=\"when-should-insertion-stay-guidebook\" class=\"wp-block-heading\">When should insertion stay guidebook?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Insertion needs to continue to be manual when manufacturing volume is low, product style adjustments frequently, or automatic feeding and tooling can not produce an acceptable return on investment.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The hand-operated process needs to still meet top quality, ergonomic, traceability, and repeatability needs.<\/p>\n\n\n\n<h3 id=\"just-how-should-roi-be-computed\" class=\"wp-block-heading\">Just how should ROI be computed?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">ROI needs to compare labour, revamp, deductions, training, defects, ergonomic direct exposure, and lost ability with the complete price of devices, feeders, tooling, integration, recognition, maintenance, software, and future transitions.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Make use of real intervention and failing data rather than excellent maker speed.<\/p>\n\n\n\n<h2 id=\"control-variation-first\" class=\"wp-block-heading\">Control Variation First<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Non-Standard Part Handling is not addressed by acquiring the fastest robotic.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It is fixed by controlling how the component gets here, where it is clutched, exactly how it moves, just how much pressure is used, and just how the result is validated.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For assistance with feeders, nozzles, odd-form insertion, assessment, board handling, and total production-line planning,&nbsp;<a href=\"https:\/\/pickandplacemachine.com\/contact\/\">contact the SMT design team<\/a>&nbsp;with component illustrations, product packaging images, board files, takt-time needs, and annual manufacturing quantity.<\/p>","protected":false},"excerpt":{"rendered":"<p>Odd-shaped elements expose the limitations of basic SMT lines. This overview describes exactly how to pick feeding, grasping, vision, insertion, and examination approaches without automating the wrong trouble.<\/p>","protected":false},"author":1,"featured_media":6679,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_gspb_post_css":"","footnotes":""},"categories":[837],"tags":[1697,1699,1696,1673,1698,1050],"class_list":["post-6668","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-process-quality","tag-non-standard-part-handling","tag-odd-form-insertion","tag-odd-shaped-components","tag-pcb-setting-up","tag-robotic-grippers","tag-smt-automation"],"blocksy_meta":[],"_links":{"self":[{"href":"https:\/\/pickandplacemachine.com\/tr\/wp-json\/wp\/v2\/posts\/6668","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/pickandplacemachine.com\/tr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/pickandplacemachine.com\/tr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/pickandplacemachine.com\/tr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/pickandplacemachine.com\/tr\/wp-json\/wp\/v2\/comments?post=6668"}],"version-history":[{"count":2,"href":"https:\/\/pickandplacemachine.com\/tr\/wp-json\/wp\/v2\/posts\/6668\/revisions"}],"predecessor-version":[{"id":6680,"href":"https:\/\/pickandplacemachine.com\/tr\/wp-json\/wp\/v2\/posts\/6668\/revisions\/6680"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/pickandplacemachine.com\/tr\/wp-json\/wp\/v2\/media\/6679"}],"wp:attachment":[{"href":"https:\/\/pickandplacemachine.com\/tr\/wp-json\/wp\/v2\/media?parent=6668"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/pickandplacemachine.com\/tr\/wp-json\/wp\/v2\/categories?post=6668"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/pickandplacemachine.com\/tr\/wp-json\/wp\/v2\/tags?post=6668"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}